Amazon.se: Kundrecensioner: Creality CR Touch Auto Nivelleringssats, 3D-skrivare Plattform Bil Nivåsensor Kit för Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5/ och CR 10-serien med 32-bitars V4.2.2/V4.2.7 Moderkort
Hoppa till huvudinnehållet
.se
Hej Välj din adress
Alla kategorier
SV
Hej, logga in
Konto & listor
Returer & beställningar
Kundvagn
Alla
Kundtjänst för personer med funktionsnedsättning Kundtjänst Bästsäljare Erbjudanden Prime Hem & kök Böcker Elektronik Presentidéer Leksaker & spel Presentkort TV-spel & konsoler Bygg, el & verktyg Hälsa, vård & hushåll Sport & outdoor Sälj
swm-sv

  • Creality CR Touch Auto Nivelleringssats, 3D-skrivare Plattform Bil...
  • ›
  • Kundrecensioner

Kundrecensioner

4,4 av 5 stjärnor
4,4 av 5
399 övergripande betyg
5 stjärnor
72%
4 stjärnor
13%
3 stjärnor
7%
2 stjärnor
2%
1 stjärna
7%
Creality CR Touch Auto Nivelleringssats, 3D-skrivare Plattform Bil Nivåsensor Kit för Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5/ och CR 10-serien med 32-bitars V4.2.2/V4.2.7 Moderkort

Creality CR Touch Auto Nivelleringssats, 3D-skrivare Plattform Bil Nivåsensor Kit för Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5/ och CR 10-serien med 32-bitars V4.2.2/V4.2.7 Moderkort

avKOYOFEI
Skriv en recension
Hur kundrecensioner och betyg fungerar

Kundrecensioner, inklusive stjärnrecensioner av produkter, hjälper kunder att lära sig mer om produkten och avgöra om det är rätt produkt för dem.

Vi använder inte ett enkelt medelvärde för att beräkna den totala stjärnrecensionen och den procentuella fördelningen per stjärna. Istället tar vårt system hänsyn till saker som till exempel hur nyligen en recension har gjorts och om recensenten köpte artikeln på Amazon. Det analyserar också recensioner för att verifiera deras trovärdighet.

Läs mer om hur kundrecensioner fungerar på Amazon
Visa alla köpalternativ

Sök
Sortera efter
Populäraste recensionerna
Filtrera efter
Alla recensenter
Alla stjärnor
Text, bild, video
399 totalt betyg, 102 med recensioner

Det gick inte att filtrera recensionerna just nu. Försök igen senare.

Översätt alla recensioner till Svenska

Från Sverige

Oliver
4,0 av 5 stjärnor Must have
Recenserad i Sverige 🇸🇪 den 4 maj 2022
Verifierat köp
If you just bought a 3d printer or plan to then honestly you *need* this. It's a massive time saver. Thought at first I could do without one and save some money by just doing it manually. Just, no... Don't. It will cost sanity instead. A probe like this also opens up a lot of ways to do levelling and with newer marlin firmware you can even get a matrix of your bed with levelling values so you can see if there is something wrong with it. With this I noticed my bed was not entirely even and was a bit lower in the middle. Something i could fix once I knew. Without this probe I would probably eventually have figured it out but this helped immensely.

Only con I would say is the price. It seem intentionally marked up because they know you will need it. Translated to euros I paid about 55 for it. For what it is, while great, it's a bit expensive. And Creality should have it included with their printers since it's just a must have. Especially for beginners.
Användbart
Rapportera missbruk
Översätt omdöme till Svenska
    Visar 0 comments

Det uppstod ett problem med att ladda kommentarer just nu. Försök igen senare.


Viktor
5,0 av 5 stjärnor Wow, what an upgrade!
Recenserad i Sverige 🇸🇪 den 3 april 2022
Verifierat köp
This is the number one upgrade I would recommend you to get if you are doing your bed levelling manually. I wouldn't say that it is just "plug and play"; I had some problems getting the Z-offset value right despite watching tutorials and reading manuals, but I got there in the end. And once there it works like a charm!
Användbart
Rapportera missbruk
Översätt omdöme till Svenska
    Visar 0 comments

Det uppstod ett problem med att ladda kommentarer just nu. Försök igen senare.


pp qq
5,0 av 5 stjärnor A must have
Recenserad i Sverige 🇸🇪 den 30 december 2021
Verifierat köp
Saves so much time. The single most important upgrade for any printer that doesnt already have one.
Användbart
Rapportera missbruk
Översätt omdöme till Svenska
    Visar 0 comments

Det uppstod ett problem med att ladda kommentarer just nu. Försök igen senare.


Eric
5,0 av 5 stjärnor Good
Recenserad i Sverige 🇸🇪 den 23 februari 2022
Verifierat köp
Works great
Användbart
Rapportera missbruk
Översätt omdöme till Svenska
    Visar 0 comments

Det uppstod ett problem med att ladda kommentarer just nu. Försök igen senare.


Från andra länder

Lorenzo
4,0 av 5 stjärnor Funziona discretamente
Recenserad i Italien 🇮🇹 den 20 januari 2023
Verifierat köp
L'installazione ha richiesto un pò di prove con varie versioni del firmware: quello ufficiale proposto dalla Creality era impostato sulla lingua cinese, per cui l'interfaccia aveva scritte cinesi. Non saprei dire se funziona meglio o peggio di altri dispositivi simili, ma che costano meno.
A livello di qualità di stampa ho notato che il piano non è perfettamente in piano, anche dopo averlo calibrato; ma l'adesione non ne influisce, è più per un sottile aspetto estetico che da fastidio.
Rapportera missbruk
Översätt omdöme till Svenska
DIDIER MARIOTON
5,0 av 5 stjärnor Laborieux mais efficace
Recenserad i Frankrike 🇫🇷 den 24 december 2022
Verifierat köp
Le regret de ne pas avoir une procédure de mise à jour vraiment explicite, lien de téléchargement et installation de mise à jour logiciel totalement succincte, c’est regrettable.
S’en suit une visite sur YouTube où l’on finit par trouver le cheminement pour les différentes étapes de réglages.
Mais une fois réglé ! C’est un pur bonheur, mon Ender 3 pro frisait la mise en vente, j’avoue que le CR touch a sauvé la situation il est indispensable.
Kundbild
DIDIER MARIOTON
5,0 av 5 stjärnor Laborieux mais efficace
Recenserad i Frankrike 🇫🇷 den 24 december 2022
Le regret de ne pas avoir une procédure de mise à jour vraiment explicite, lien de téléchargement et installation de mise à jour logiciel totalement succincte, c’est regrettable.
S’en suit une visite sur YouTube où l’on finit par trouver le cheminement pour les différentes étapes de réglages.
Mais une fois réglé ! C’est un pur bonheur, mon Ender 3 pro frisait la mise en vente, j’avoue que le CR touch a sauvé la situation il est indispensable.
Bilder i den här recensionen
Kundbild
Kundbild
En person tyckte detta var till hjälp
Rapportera missbruk
Översätt omdöme till Svenska
christophe
5,0 av 5 stjärnor Très bien
Recenserad i Frankrike 🇫🇷 den 28 december 2022
Verifierat köp
Marches on top
Montage facile juste eu besoin de changer le firmware et refaire les réglages du plateau j en suis ravie
Rapportera missbruk
Översätt omdöme till Svenska
Matthew
4,0 av 5 stjärnor Works great on my Ender 3 :)
Recenserad i Storbritannien den 16 januari 2023
Verifierat köp
Innehållet kunde inte läsas in.
 Ok so it was hard to find the correct software to install it but when I did it worked so well and is still doing so. After calibration every first layer is perfect. Have not for a bad 1 layer since installing it very happy
Rapportera missbruk
Översätt omdöme till Svenska
David Brandwood
4,0 av 5 stjärnor Pretty good but not quite perfect.
Recenserad i Storbritannien den 24 mars 2022
Verifierat köp
Setup was easy enough though unless you've fitted one before, do your homework first. it involves updating your firmware (easy enough once you've found the info' you require but the instructions it comes with aren't the best but decent) but there are a few bits of info that no-one seems to put together in one place. If your printed not connected to a computer you'll need a BLANK memory card, oh, and then you'll need it whenever you power it up after everything is setup as the printer doesn't store it internally on eeprom. Another little nugget of info' I discovered after I'd had some issues with prints after the install was you'll be advised to run a PID Auto Tune (this applies if you do ANYTHING involving the hotend on these things, new thermistors, new hotends, some even advise after a nozzle change too). One other niggle, when you manually set your bed level, with a bit of tweaking you can get it absolutely spot on, not so with this (or the BL Touch for that matter) the Z axis adjustments only work to 0.1mm (it's an Ender printer thing) and if your printer is like mine, it's in between for the perfect setting so it's either a smidge tight or a smidge high. One last point you'll need to modify the default start code in your slicer software so it does the level test prior to each print, takes about 3 minutes and you're advised to do it while the bed is at the temp' you intend to print on so if you're printing with your bed at say 70 degrees C that's the temperature to run the test at to allow for any expansion of the bed, again, it want's to be part of the start code you'll need to setup. Oh, nearly forgot, there's different versions of the updated firmware on the site, make sure you download the version from the CR Touch section and not the mainboard support page (it makes a difference apparently).

Is it worth it? definitely, there's a few things to learn and tweak but it's saved me endless hours in setting up the bed to print and it's consistent. I don't know if it actually makes any odds but this comes with a metal sensing pin whereas the BL Touch is plastic and comes with replacements, which to me suggests the manufacturers of the BL know they're prone to breaking, so I opted for this, maybe just a preference but at least think about it before you buy another option.

Hopefully the above tips will help anyone new to this and reduce the learning curve of it. Look on the internet at various tutorials, it'll be time well spent, don't just go off one video as like I said earlier none of them seem to cover every point but each give their own nuggets of info and chances are there's some I don't yet know about too.

Another last thought, be aware if you have the older 8-bit motherboard, you can't fit one of these, there's no socket for it on the board. The way to tell is the USB socket, if it has the trapezoid older type, it's 8-bit, if it has the newer slim mini USB it's 32-bit and you're fine to go.
En person tyckte detta var till hjälp
Rapportera missbruk
Översätt omdöme till Svenska
Brendan
5,0 av 5 stjärnor Should be your first upgrade for your ender 3 V2
Recenserad i Storbritannien den 15 januari 2023
Verifierat köp
Great upgrade for your ender 3 V2. Easy to install and would recommend to replace stock firmware with the professional firmware as I had better experience with it after it was installed.
Rapportera missbruk
Översätt omdöme till Svenska
  • ←Föregående sida
  • Nästa sida→

Behöver du kontakta kundservice? Klicka här
‹ Se alla detaljer för Creality CR Touch Auto Nivelleringssats, 3D-skrivare Plattform Bil...

Dina nyligen visade artiklar och framhävda rekommendationer
›
Visa eller redigera din webbhistorik
Via länken till höger kan du lätt navigera tillbaka till de produktsidor du tidigare besökt.

Tillbaka till toppen
Lär känna oss
  • Företagsinformation
  • Jobb
  • Pressmeddelanden
  • Amazon Science
Följ oss på
  • Facebook
Tjäna pengar med Amazon
  • Skydda och bygg ditt varumärke
  • Sälj på Amazon
  • Bli partner
  • Fulfilment by Amazon
  • Marknadsför dina produkter
Låt oss hjälpa till
  • Spåra paket eller visa beställningar
  • Fraktpriser och policyer
  • Returer och ersättningsprodukter
  • Återvinning
  • Amazon-mobilappen
  • Kundtjänst
  • Australien
  • Brasilien
  • Kanada
  • Kina
  • Tyskland
  • Spanien
  • Frankrike
  • Indien
  • Italien
  • Japan
  • Mexiko
  • Nederländerna
  • Polen
  • Saudiarabien
  • Singapore
  • Turkiet
  • FAE
  • Storbritannien
  • USA
IMDb
Film, TV och kändisar
Goodreads
Bokrecensioner
& rekommendationer
Amazon Web Services
Skalbara moln
Databehandlingstjänster
Amazon Music
Streama miljontals låtar
 
Book Depository
Böcker med fri leverans till hela världen
Alexa
Lättillgängliga Analyser
för Webben
Shopbop
Designer
Modemärken
DPReview
Digital
Photography
  • Villkor för användning och köp
  • Integritetsmeddelande
  • Bolagsinformation
  • Cookiemeddelande
  • Meddelande om intressebaserade annonser
© 1996-2023, Amazon.com, Inc. eller dess dotterbolag