945,11 kr

FRI frakt: Onsdag, 21 apr

Endast 6 kvar i lager (fler är på väg).

Säker transaktion

Fraktas från och säljs av Amazon.

Lägg till presentalternativ

Dela

Har du denna produkt och vill sälja den?

Sälj på Amazon

StarTech.com 4 portar SATA III RAID-kontroll PCI Express gränssnittskort – PCIe seriell ATA-kontrolladapter – HyperDuo SSD tiering

av StarTech.com

641 betyg

Pris:

945,11 kr

Nytt (7) från 945,11 kr + FRI frakt

Förbättra ditt köp

Detta passar din .

Stöder automatisk nivåindelad SSD-datalagring med HyperDuo
4 AHCI SATA III-portar (6 Gbps) genom PCI express x2
Fullt kompatibelt med specifikationer för SATA 3.0 och bakåtkompatibelt med SATA I/II-enheter (1,5/3,0 Gbps)
Stöder hårdvarulägen RAID 0, 1 och 1+0 som konfigureras genom BIOS
Uppfyller standarder för PCI Express 2.0

Produktinformation

Stil:4 x SATA III

Produkten har slutat tillverkas : Nej
Språk : Engelska
Produktens mått : 17.5 x 14.5 x 3 cm; 145.15 Gram
Tillverkare : STARTECH.COM
ASIN : B00BUC3N74
Artikelnummer : PEXSAT34RH

Kundrecensioner:
641 betyg

Kunder som köpte denna artikel har även köpt

Sida 1 av 1 Börja omSida 1 av 1

Vilka andra artiklar köper kunderna efter att ha tittat på den här artikeln?

Sida 1 av 1 Börja omSida 1 av 1

Har du en fråga?

Hitta svar i produktinformationen, frågor och svar samt i recensionerna.

Det uppstod ett problem med att slutföra din förfrågan. Försök med din sökning igen senare.

Alla Produktinformation Kundfrågor och svar Kundrecensioner

Produktbeskrivning

Stil:4 x SATA III

PEXSAT34RH SATA-kontrollerkort med 4 portar och HyperDuo för PCI express 2.0 lägger till 4 AHCI SATA III-portar till en dator genom en PCI-kortplats (x2) och ger flera interna anslutningar på 6 Gbps för högpresterande hårddiskar och solid state-enheter (SSD). SATA-kortet har HyperDuo och ger automatisk nivåindelad SSD-datalagring som ger dig den perfekta blandningen av prestanda från SSD-lagring och kostnadseffektiviteten och den höga kapaciteten från vanliga hårddiskar. Genom att kombinera SSD- och HDD-enheter till en enda volym (upp till 3 SSD + 1 HDD) arbetar HyperDuo diskret i bakgrunden för att identifiera och flytta filer som används ofta till de snabbare SSD-enheterna för snabbare datagenomströmning; upp till 80 % av SSD-prestandan! (Obs.: Den automatiska nivåindelade datalagringen från HyperDuo är kompatibel med datorer som använder BIOS.) SATA-kontrollerkortet för PCIe stöder portmultiplicering (PM) och låter flera SATA-enheter anslutas till en port med en enda kabel för totalt 7 enheter (upp till 4 enheter genom PM på en port och en enda enhet till de resterande 3 portarna). SATA-kontrollerkortet har dessutom en effektiv RAID-lösning med ursprungligt RAID-stöd (0, 1, 1+0). Prestandamått på genomströmning Enhetskonfiguration Genomströmning Enhetsstorlek 1 x HDD 112.81 MB/s 2 TB 1 x SSD 490,28 MB/s 120 GB 1 x HDD + 1 x SSD HyperDuo (felsäkert läge) 489.28 MB/s 2 TB 1 x HDD + 2 x SSD HyperDuo (felsäkert läge) 715.13 MB/s 2 TB Enheter som används: SSD: OCZ Vertex 3 Series 2,5" 120 GB (VTX3-25SAT3-120G) HDD: Western Digital Caviar Green 3,5" 2 TB (WD20EARS) Mjukvara som används: IO Meter, 256 kB sekventiell läsning, ködjup = 10 Detta SATA-kort för PCIe täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Kunder som tittade på denna artikel tittade även på

Sida 1 av 1 Börja omSida 1 av 1

Kundens frågor och svar

Se frågor och svar

Kundrecensioner

5 stjärnor		63%
4 stjärnor		15%
3 stjärnor		10%
2 stjärnor		3%
1 stjärna		8%

Hur beräknas betyg?

Populäraste recensionerna från andra länder

Översätt alla recensioner till Svenska

Jeff

Excellent card but a warning for Windows 10 1809 users !!!

Granskad i Storbritannien den 23 mars 2019

Stil: 2x eSATA III, 2x SATA IIIVerifierat köp

Superb card. Plug in and away you go. 8x port multiplyer (JBOD) on eSata ext ports. Fast 6gbs transfer speeds. No dropouts or disconnects. Now the bad news - DOES NOT WORK (YET) ON WINDOWS 10 1809.17763.379. If you are still on revision 316 or lower including builds 1803 it works fine. The fault appeared to be introduced in 1809.17763.348 and Startech support are aware and hopefully working on a fix. Microsoft, as per usual will take a bit longer as getting the required info to the right people is almost impossible.

I tried several other cards but this appears to be the only one on the market that supports 8 external drives.
So don't waste your time on any alternatives (other Startech models or Marvell branded cards (they all use similar ASM CHIPS/DRIVERS)) BECAUSE i'VE TRIED THEM. They will WORK with 5 drives although the Startech recognised 6?

I switched to USB mode (connection) which works fine whilst waiting for the fix. Will update when this happens.

Läs mer

5 människor tyckte detta var till hjälp

Översätt omdöme till Svenska

Podgerama

Window 10 - out of date software causes memory leaks and crashes

Granskad i Storbritannien den 3 januari 2020

Stil: 2x SATA IIIVerifierat köp

This product ships with a driver CD that is not windows 10 friendly, but anyone seeking to install this kind of kit has enough brains to install drivers manually to get this going, and the Marvell Storage utility is needed to configure it.

That's where the problems began.

I was using this in a professional enviroment (on a tight budget, hence using this) to give me a hardware RAID 1 and to recieve emails if a drive went down. the computer was frequently running out of ram and locking up every 3 days after this card was introduced.

The Driver shipped with the package was several versions out of date, and more importanly the RAID utility software on the disc was from June 2017 and has a not very well publicised memory leak, it seems that version 4.1.0.2032(17 Sep 2018) fixes this (it's available on HP's website)

I would give this product 4 stars, the RAID utility does do alert emails, but that configuration isn't as straightforward as others. but i bought this in 2019 and it came with software that was years out of date and caused me months of grief. it works fine now, but i'm not getting the hours back i lost to this.

Läs mer

4 människor tyckte detta var till hjälp

Översätt omdöme till Svenska

Nick Charles

For 2x eSATA III, 2x SATA III - Only half speed expected.

Granskad i Storbritannien den 7 april 2017

Stil: 2x eSATA III, 2x SATA IIIVerifierat köp

Just in case anyone doesn't spot it 2x eSATA III, 2x SATA III in the item description should really read 2x eSATA III OR 2x SATA III because you only have two channels, either can be internal SATA III or external SATA eSATA. I only needed one extra internal SATA III connection so have the card set up for one of each. Its a simple mater of moving a block of jumpers to change it over.

I only needed an extra SATA III port for an optical drive (CD\DVD) after using up the 4 onboard SATA ports on the motherboard, however I tested the card with just my primary SSD plugged into it to check the results. I tested the same drive plugged into the main SATA controller on the mother board first so I could compare results. THE SPEEDS FOR THE DRIVE ON THIS CONTROLLER WERE HALF THOSE OF WHEN THE DRIVE WAS CONNECTED TO THE MOTHERBOARD. Tested using the default tests with CystalDiskMark 6.2.1 x64.The Seq Q32T1 connected to the motherboard was 407 MB/s and only 207 connected to this card all the other test speeds were half or less when connected to using this card.

The results don't bother me because I'm only using the controller for an optical drive but this device is clearly not as fast as I'd have expected it to be.

On the positive side the device installed automatically in Windows 10 without the need for extra drivers.That got me thinking so I went off and downloaded the latest drives from StarTechs site and repeated my test. The results were the same the SSD data transfers speeds where all half speed.

Läs mer

7 människor tyckte detta var till hjälp

Översätt omdöme till Svenska

M. Gibson

Works Perfectly;Windows 10.1 boots from SSD attached to this card

Granskad i Storbritannien den 28 februari 2017

Stil: 2x SATA IIIVerifierat köp

I have a relatively old PC based on an ASUS P7P55D LE motherboard. (LGA1156 socket). I am running Windows 10.1 and little while ago installed a Samsung EVO 850 SSD to improve boot times etc. Recently, one of my optical drives (SATA 2) disappeared from Windows; after switching cables etc. I concluded there may be an issue with the motherboard SATA port to which it was attached. I have a load of hard drives installed and all the motherboard SATA sockets were in use so had no spare. I purchased this in order that could connect that optical drive. After installing, a pretty simple task, I found it works perfectly. No drivers to install, drive instantly recognised by Windows etc.

I also did an experiment to determine whether my Samsung SSD Boot drive would work if attached to this card. The answer is yes. I connected my SSD to the 2nd port of this card and after juggling HDD boot priorities in BIOS, booted into Windows without issue,

Theoretically, my SATA 3 SSD should be faster connected to this card than it is connected to the motherboard SATA 2 port. Single channel PC-E v2.0 (this card) theoretically operates at 500MB/s (in each direction) so is theoretically faster than SATA 2 (300MB/s) and closer to the SATA 3 600MB/s the SSD could operate at. So in theory, if the SSD were the only thing attached to the PCI-E SATA card (ie nothing else was sharing the PCI-E channel), I should get closer to the SATA 3 speeds afforded by the SSD.

Theory is a great thing and whilst I think there was a slight improvement there are so many other factors that in reality, this configuration yields no noticeable improvement but adds another component into the chain of things that might go wrong. I concluded that I would keep the SSD connected to the motherboard port and thus eliminate one potential failure point.

In summary, this card works perfectly (so far) and has provided me with what I needed, additional internal SATA ports. Based on my experimentation, I am able to get an SSD boot drive working with little effort. In terms of the latter, I would not assume this would work with all motherboards, but works fine with my ASUS P7P55D.

Läs mer

4 människor tyckte detta var till hjälp

Översätt omdöme till Svenska

Bob

Works perfectly in HP ProLiant Microserver Gen8 to connect a separate internal boot drive

Granskad i Storbritannien den 11 augusti 2016

Stil: 1 x eSATA III, 1 x SATA IIIVerifierat köp

Like a lot of others, I don't normally write reviews, mostly because a lot of the stuff I buy isn't worth reviewing. But I'm posting this here in case it helps someone, as I know how difficult it can be to figure out definitively whether something will work or not. I recently (July 2016) bought an HP ProLiant Microserver Gen8 to use as a backup server. I didn't want to sacrifice one of the drive bays for a boot disk and had read all of the stories online about the hoops to go through to get it to boot from a SATA drive connected to the onboard ODD connector, and the compromises that have to be made to make that work. I decided that I didn't want any of those compromises and so bought this card (specifically: Startech.com 6 Gbps PCI Express SATA Controller Card Adapter with 1 eSATA and 1 SATA) to connect my boot drive to. I'm happy to report it works perfectly, the server is now booting from an SSD connected to the card and running Ubuntu 16.04LTS. With only a single drive connected there is nothing to configure, so you can skip the bit in the setup guide on configuration (Ctrl-M during POST). There's a driver disk included for use with Windows but I obviously didn't need that and can't comment on how well or otherwise it works under Windows.

Läs mer

5 människor tyckte detta var till hjälp

Översätt omdöme till Svenska

Se alla recensioner

IMDb Film, TV och kändisar	Goodreads Bokrecensioner & rekommendationer	Amazon Web Services Skalbara moln Databehandlingstjänster

Amazon Music Streama miljontals låtar	Book Depository Böcker med fri frakt till hela världen	Alexa Lättillgängliga Analyser för Webben

Shopbop Designer Modemärken	DPReview Digital Photography	Amazon Second Chance Skicka vidare, byt in, ge dina saker nytt liv.

Välj dina inställningar för cookies

Bild otillgänglig

StarTech.com 4 portar SATA III RAID-kontroll PCI Express gränssnittskort – PCIe seriell ATA-kontrolladapter – HyperDuo SSD tiering

Förbättra ditt köp

Produktinformation

Kunder som köpte denna artikel har även köpt

Vilka andra artiklar köper kunderna efter att ha tittat på den här artikeln?

Har du en fråga?

Produktbeskrivning

Kunder som tittade på denna artikel tittade även på

Kundrecensioner

Inga kundrecensioner från Sverige

Populäraste recensionerna från andra länder