|Inkluderade komponenter||Verktygslådor och verktygslådor|
|Är batterier inkluderade?||Nej|
|Produktens mått||41.91 x 22.1 x 20.83 cm; 6.19 Kilogram|
Park Tool AK-5 - Avancerad verktygssats för mekaniker
Förbättra ditt köp
- AK-5 - Avancerad mekaniskt verktygskit
| Vill du återvinna dina elektriska eller elektroniska apparater gratis? Läs mer|
Köp den med
Park Tool har satt ihop denna uppsättning noggrant utvalda verktyg för att göra grundläggande underhåll och rengöring samt utföra ett brett utbud av reparationer och justeringar på nästan alla cyklar. Ett perfekt sätt att starta eller lägga till i din samling av cykelverktyg för butikskvalitet. Nu inkluderar den senaste volymen av Big Blue Book, BBB-4. AK-5 innehåller en tuff verktygslåda för att skydda din investering. Alla verktyg som täcks av Park Tools legendariska begränsade livstidsgaranti.
Populäraste recensionerna från andra länder
Recenserad i Singapore 🇸🇬 den 23 augusti 2020
- Most parts are easily identifiable with either Park Tool's blue finish or their label
- Kit includes most commonly used parts for most common bikes
- The tools appear solid and have held up through repeated, although light, use
- Park Tool offers many repair videos on YouTube, while the included book offers additional technical details
- Small samples of consumables (e.g. chain cleaner, lubricant, grease, and anti-seize compound) would go far to make this kit complete
- Kit doesn't include key tools like the PP-1.2 Hydraulic Piston Press, and DAG-2.2 Bicycle Derailleur Hanger Alignment Gauge (or a smaller alternative)
- Toolbox could be sized differently (longer) to fit additional tools like the DAG-2.2
Since buying the kit, I noticed chain slippage in my usual bike as well as in a brand new bike that had a visibly misaligned rear derailleur. I decided to buy the DAG-2.2 tool and was able to fix the issue on the new bike in minutes, which the local bike shop wasn't able to fix correctly after two visits. On my old bike, I also adjusted the derailleur hanger using the gauge but then found the chain was worn (using the CC-4 tool). After replacing the chain, slippage was limited to three gears, and I found the necessary tools in the kit to replace the rear cassette. Through various adjustments, the ball-tipped hex wrenches (HXS-1.2) made it easier to reach tight spaces.
Overall, I'm very happy with the kit. Users who have bikes with something other than Shimano/SRAM/Diore parts should check the Park Tool videos to see if they need to buy additional tools suited for their bikes, specifically the chain tool and cassette lockring tool. Also consider buying the derailleur hanger alignment gauge if your bike occasionally falls onto its right side, and the hydraulic piston press for when you need to replace your disc brake pads.
Sadly, I was not even able to change even a silly MTB pedal! I quickly discovered the tool to take the pedal off, even when the right size for the part, it is tiny, the handle is comically small. There is no way you can make the tool work as a lever to release an overtightened pedal. I also quickly discovered this brand has other set of tools that can do the job better when switching pedals, but they didn't put them here. I couldn't believe they sent this kit with the worse tool for the pedal and not even with one from the middle range lines. I had to order the pro tool for the pedal from the same Park Tool company, and guess what? It worked like a charm. In 10 seconds I had the pedal out. I am keeping that one.
It seems the same with the Allen wrenches, they have a couple of better lines that didn't make it to this tool kit. I wonder if this kit is intended for kids bicycles, otherwise I am still puzzled. I don't see the value for the high price. I am returning it. There is no point in keeping it. I will order the pro tools from them, they are wonderful, and I will built up my own kit. This one didn't cut the mustard.